The 5 Best Makita Rotary Hammer Dominate Your Projects 2023

The 5 Best Makita Rotary Hammer: Dominate Your Projects 2023

Come to the main point, Buying a Makita rotary hammer is difficult? Of course, but don’t worry. In this article, we will share the 5 best Makita rotary hammers that will dominate your projects in 2023.

There are many Makita rotary hammers in the market today. We have selected the 5 best Makita rotary hammers for you. How do we select the best product? We do Amazon product reviews, live interviews, and product research. Sometimes, we use these products and then give the products a review.

Suppose you don’t have time to read our entire product reviews. Instead, buy any of these five Makita rotary hammers. We studied hard to find the best five products for you.

Daily Life Tools

Our Top 5 Picks

Best Overall: Makita HR2475 1″ Rotary Hammer

Best Upgrade: Makita XRH04Z 18V LXT® Cordless Rotary Hammer

Best All-Purpose: Makita XNB02Z 18V LXT Straight Finish Nailer

Latest One: Makita XRH01Z 18V LXT Brushless Cordless 1-Inch

Best less expensive: Makita Dhr241Z 18V Li-Ion Cordless Drill

Our Top 4 Makita Rotary Hammer Parts

Brush Holder CapCheck Latest Price On Amazon

Cord GuardCheck Latest Price On Amazon

Carbon Brush SetCheck Latest Price On Amazon

Cord for Saw and Angle GrinderCheck Latest Price On Amazon

Here is a comparison table for the 5 Makita Rotary Hammers

Rotary Hammer ModelPopularity ScoreQuality ScoreValue for moneyLight-weightEasy to use 
Makita HR2475 1″ Rotary Hammer4.
Makita XRH04Z 18V LXT Cordless
Makita XNB02Z 18V LXT
Makita XRH01Z 18V LXT Brushless
Makita Dhr241Z 18V Cordless Drill5.
Note: The scores provided are subjective and based on general opinions and reviews. Your personal tastes and requirements may vary. It is guided to conduct thorough research and read customer reviews before making a purchasing judgment.

How Do I Choose The Right Makita Rotary Hammer?

What to think about when picking a tool based on its features and differences.

How do I choose a suitable Makita rotary hammer? What to think about when picking a tool based on its features and differences.

When choosing a Makita rotary hammer, there are 10 several factors to consider. Here are 10 main key points to keep in mind:

Motor Orientation

The Makita rotary hammers can have a horizontal or vertical motor orientation. Horizontal motors are more practical for general household use as they are lighter and can be used in narrow spaces. Vertical motor models, on the other hand, offer greater power and better cooling but are generally considered more suitable for professional use.

Modes of Operation

Pay attention to the available modes of operation. Standard modes include drilling, drilling plus impact, and impact-only mode for chiseling. Some models may have additional modes for specific tasks. Choose a Makita rotary hammer that offers the modes you need for your projects.

Engine Power

The motor’s power indicates the tool’s ability to handle intensive workloads. Household rotary hammers typically range from 450 to 900 watts, while professional-grade tools can go beyond 900 watts. Select a power level based on the frequency and intensity of your work. Higher power is required for frequent and heavy-duty use.

Impact Force

Impact force measures the tool’s effectiveness in interacting with the working surface. It is usually measured in joules, Newton meters, or inch pounds. The higher the impact force, the easier it is to drill through rigid materials. Consider the impact force rating based on the type of projects you will be undertaking.

Drilling Diameter

The drilling diameter determines the size of the holes you can make. This value depends on the type of drill bit or crown used. Different Makita rotary hammers can accommodate various hole diameters in materials like concrete and metal. Choose a model that can handle the desired hole sizes for your applications.

Rotation Speed and Impact Rate

The rotation and impact rates affect the drilling speed and efficiency. Higher speeds are generally preferred for faster drilling. Household Makita rotary hammers usually have rotation speeds of 1000 to 1500 revolutions per minute, while professional models may have slower speeds for chiseling purposes.

Chuck Type

The chuck holds and secures the working attachments such as drills, crowns, or chisels. The two common chuck types are SDS-Plus and SDS-Max. SDS-Plus chucks are used for lighter and medium-sized rotary hammers, while SDS-Max chucks are found in heavier, more robust models.


Consider the weight of the Makita rotary hammer as it affects comfort and usability during extended periods of work. Lighter tools are more suitable for household use. In contrast, heavier ones are typically associated with professional-grade equipment when choosing a weight you can handle comfortably based on the nature of your projects.

Additional Features

Look for additional features that enhance the tool’s performance and convenience. These may include a reverse function for rotating the working element in the opposite direction, a smooth start feature to avoid sudden jolts, anti-vibration systems for operator comfort, and protection against drill jamming.

Equipment and Case

Consider the tool’s complete set and the quality of the carrying case. A durable case with secure latches ensures the safe storage and transportation of the tool. Depending on your needs, including drills, chisels, or adapters in the set can also be beneficial.

Remember, a good Makita rotary hammer can be inexpensive. You can find an affordable option by selecting a tool that meets your specific requirements and tasks.

Best Overall
Makita HR2475 1″ Rotary Hammer


The Makita HR2475 rotary hammer is ideal for drilling holes in concrete, masonry, and wood. The 7 AMP motor produces 0-1,100 RPM, 0-4,500 BPM, & 2.7 Joules of impact energy at no-load. The HR2475 has three modes: “Rotation Only,” “Hammering with Rotation,” and “Hammering Only” for numerous applications. 

A torque-limiting clutch disengages gears if the bit binds to prevent gear damage. An ergonomic and well-balanced design, rubberized D-handle comfort grip, soft grip side handle, one-touch sliding chuck, recessed lock-on button, and oversized trigger switch make the HR2475 comfortable and easy to operate. 

Multiple chisel positioning lets the bit be set at 40 places to match the application.

Here are some key features of the Makita HR2475
7 AMP motor
0-1,100 RPM, no load speed
0-4,500 BPM impact rate
Three-mode operation
Recessed lock-on button
Multiple chisel positioning
Collecting information from Amazon

The Makita HR2475 is a versatile, mighty rotary hammer perfect for various applications. It is well-designed & easy to use, making it an excellent choice for professional and DIY users.

Best Upgrade
Makita XRH04Z 18V LXT® Lithium-Ion Cordless


It introduces the Makita XRH04Z 18V LXT Lithium-Ion Cordless 7/8″ SDS-Plus Rotary Hammer. This powerful tool will revolutionize your drilling experience. This versatile Makita rotary hammer is designed to deliver faster and more efficient percussive drilling on the job site.

In addition, its compact design and reduced vibration ensure precision and comfort during operation.

10 Key Features of the Makita 18V LXT Lithium-Ion Cordless 7/8″ SDS-Plus Rotary Hammer
Built-in Torque Limiter for stable torque control and consistent results.
Fast Charging Times with Makita’s 18V Lithium-Ion battery.
Built-in Clutch to protect gears and ensure durability.
Adjustable Drilling Speed from 0 to 1,200 RPM and 0 to 4,000 BPM.
Part of Makita’s 18V Lithium-Ion Series for battery interchangeability.
Collecting information from Amazon

One of the best standout qualities of this Makita tool is its three-mode operation, allowing you to choose between rotation only, hammering with rotation, or hammering only. This flexibility makes it suitable for many concrete drilling tasks. 

In addition, the built-in torque limiter also ensures stable torque control, providing consistent results every time.

As part of Makita’s expanding 18V Lithium-Ion series, this Makita rotary hammer is powered by an 18V Lithium-Ion slide-style battery. Makita has the fastest charging times in its category, so you can work more and wait less. This efficiency is a game-changer for professionals who use their tools to work fast and efficiently.

The Makita 18V LXT Lithium-Ion Cordless Rotary Hammer features a compact pistol grip design for easy handling and flexibility. The Makita-built variable speed motor allows you to adjust the drilling speed from zero to 1,200 RPM and zero to 4,000 BPM, providing optimal control and precision. 

In addition, the built-in clutch automatically disengages gears if the bit binds, reducing gear damage and ensuring durability. Furthermore, the job site-tested shock absorbent handle protects the battery housing, enhancing the tool’s durability and longevity. Take advantage of this more intelligent choice for your drilling needs. 

The Makita 18V LXT Lithium-Ion Cordless 7/8″ SDS-Plus Rotary Hammer combines speed, convenience, durability, and comfort in one exceptional tool. Check the link to find the most updated price in real time. Make the best of this opportunity and determine for yourself the importance of the difference.

Best All-Purpose
Makita XNB02Z 18V LXT Straight Finish Nailer, 16 Gauge, 2-1/2″


We recently purchased the Makita XNB02Z 18V LXT Straight Finish Nailer, 16 Gauge, 2-1/2″ rotary hammer. It has exceeded my targets in every way. So don’t be swayed by the negative reviews; this tool is a game-changer.

First and foremost, this Makita rotary hammer is a beast when driving nails into solid oak. While some reviewers complain about its performance, they fail to mention that using a 2.0 or 3.0 battery won’t do the trick. 

Instead, having a 4.0 or higher battery and some downward pressure would be best to experience its true power. And let me assure you, it delivers. With the correct battery, this Makita tool sets nails into hardwood effortlessly.

Technical Details
Item Weight: ‎8.12 pounds
Batteries Included?: ‎No
Batteries Required?: ‎Yes
Warranty Description: ‎3-year limited warranty
Collecting information from Amazon

One aspect that sets Makita apart is its superior craftsmanship. Made in Japan, this rotary hammer showcases the quality and precision the brand is known for. Unlike tools made in China, Makita’s Japanese manufacturing ensures exceptional performance and longevity. 

Don’t compromise on cost; opt for the official site or trusted sellers to ensure you get an authentic Japanese-made product.

Despite being slightly heavier, this rotary hammer’s weight is an advantage. It provides the necessary stability and control for accurate nail setting, especially for crown molding. As a seasoned expert with 20 years of experience, I value the ramp-up time, which some reviewers complain about. 

However, a 1.5 to 2-second delay is negligible when prioritizing precision over rapid-fire nail shooting. Trust me, every nail you set with this tool will be perfectly placed.

Durability is another key strength of the Makita rotary hammer. Built like a tank, it can withstand the most challenging job site conditions and will last for years. So whether using it for occasional projects or heavy-duty applications, this tool can take a beating without losing its performance.

Battery life is crucial for uninterrupted work, and the Makita XNB02z 18V LXT Lithium-Ion series delivers. With a 5.0 battery, you can expect a full day’s use without worrying about recharging. In addition, the reliability and efficiency of Makita’s battery technology are unmatched.

While I’m highly impressed with the current lineup of nail guns from Makita, I can’t help but eagerly anticipate the release of a 1/4-inch crown staple gun. Makita has proven its dedication to meeting professional needs, and a staple gun for securing particle board to linoleum would be a welcome addition.

Experience the power, precision, and reliability of the Makita 18V LXT Cordless 2-1/2″ Straight Finish Nailer. Upgrade your woodworking projects and enjoy the freedom of cordless convenience. Makita’s commitment to excellence shines through in every feature, ensuring your craftsmanship shines. 

Don’t settle for less—invest in the best and elevate your woodworking to new heights with Makita.

In conclusion, if you’re seeking a rotary hammer that combines impressive performance, durability, and unmatched precision, look no further than the Makita 18V LXT Lithium-Ion Cordless 7/8″ SDS-Plus Rotary Hammer. 

Don’t let the cynics discourage you; this tool is a reliable workhorse that will exceed your expectations. Invest in quality, invest in Makita, and experience the difference for yourself.

Makita XRH01Z 18V LXT Brushless Cordless 1-Inch


Introducing the Makita 18V LXT Lithium-Ion Brushless 1″ Rotary Hammer (model XRH01Z, tool only) featuring the revolutionary Makita BL Brushless Motor Technology, delivering an incredible up to 50% longer run time. 

As the first 1″ capacity rotary hammer in the 18V cordless category, the XRH01Z sets new power and performance standards.

Equipped with an efficient BL Brushless Motor, this rotary hammer offers variable speed control, providing a range of 0-950 RPM, 4,700 BPM, and 2.0 Joules of impact energy. In addition, its extended run time, up to 50% longer than current Makita 18V LXT rotary hammers, ensures uninterrupted productivity on the job.

Experience enhanced ease of use and efficiency with the XRH01Z. It features a 3-mode operation, allowing you to choose between rotation-only, hammering with rotation, and hammer-only modes, adapting effortlessly to various drilling and chiseling tasks. 

In addition, the sizable 2-finger trigger adds convenience and ensures greater comfort during prolonged use.

Elevate your drilling and chiseling capabilities with the power, efficiency, and convenience of the Makita 18V LXT Lithium-Ion Brushless 1″ Rotary Hammer. With its extended run time, variable speed control, and versatile operation modes, this tool is designed to meet the needs of experts and DIY enthusiasts alike. 

Embrace the freedom of cordless convenience and trust Makita’s commitment to delivering exceptional quality and performance.

Makita Dhr241Z 18V Cordless Rotary Hammer Drill


The Makita Dhr241z 18VLi-lon Cordless Super Hammer Drill lives up to the brand’s reputation, delivering exceptional performance and power. While the drill does not come with a battery, it was not an issue as I already owned other Makita devices with compatible batteries. Now, let’s dive into the machine itself.

I was pleasantly surprised by the sheer power of this hammer drill. I have a prefabricated basement with solid concrete walls, and my old machine struggled with drilling into them. 

However, the new Makita battery drill effortlessly powers through the solid concrete walls. It’s truly incredible, and this alone made the purchase well worth it. In addition, I am genuinely thrilled with its performance. It effortlessly drilled a 16 mm hole into the solid concrete without the sweat.

The Makita 18V Cordless Super Hammer Drill boasts an array of impressive features. Its three-mode operation provides versatility for drilling, hammering, and more.

The electronic brake feature allows for quick stops, enhancing user protection and preventing accidents. In addition, the drill’s design showcases a stylish blue and black color scheme, reflecting Makita’s signature aesthetic.

With 19 speeds available, users can fine-tune the drilling experience to their needs. In addition, the maximum power output of 350 watts ensures efficient and reliable performance.

Weight 7.3 pounds, this drill strikes a balance between power and maneuverability. It is compact, 6.89 x 1.48 x 3.2 inches, making it easy to handle and store. The lithium-ion battery required for operation is not included but can be obtained separately.

In summary, the Makita 18V Cordless Super Hammer Drill impresses with its exceptional power, reliability, and wide range of features. With its ability to tackle solid concrete walls and user-friendly design effortlessly, this drill is a valuable addition to any toolbox. 

Whether for professional use or DIY projects, this Makita drill is a dependable choice that delivers outstanding results.

How does a rotary hammer work?

How? A rotary hammer works through a series of mechanisms that convert the motor’s rotary motion into a decisive hammering action. Let’s break down how it operates based on the provided content:

Gearbox Housing

The gearbox housing holds the various components of the rotary hammer together.

Piston and Swing Bearing

Inside the housing is a piston and a swing bearing. Unfortunately, the swing bearing is an unsafe structure, including a ball bearing with an angled bearing race. As the motor rotor rotates, the swing bearing translates this rotary motion into a linear motion, acting as a cam.

Swing Arm

The swingarm is attached to the swing bearing and moves back and forth. This motion is responsible for the hammering action.

Pneumatic Hammer

Inside the piston is another piston known as the pneumatic hammer block. This part creates a soft connection and operates using air pressure. When the piston reaches a certain point, it allows air into a sealed chamber, creating the pneumatic impact.

Tool Holder

The tool holder is where the drill bit or chisel is inserted. It houses the striker pin or anvil, which receives the impact from the swing arm.

Impact and Shock Absorption

The striker pin hits the tool, which hits the material being drilled or chiseled. The three-part hammering mechanism provides shock absorption, reducing the drill’s wear and minimizing the user’s impact. The constant impact would lead to premature wear and discomfort without this mechanism.

How do you use a rotary hammer drill?

“Following a few simple steps is essential for effective operation when using a rotary hammer drill.” 

How do you use a rotary hammer drill?

To begin, choose the appropriate Makita rotary hammer drill model, whether cordless or not. Installing the drill bit is straightforward: pull the Chuck back, turn it to lock in the bit, and then release the Chuck. 

It’s worth noting that the drill can also be used as a chipper, with the chipper bit installed in the same manner as the drill bit. 

Let’s consider a battery-powered hammer drill equipped with a one-inch drill bit for demonstration purposes. Before starting, ensure the drill is set to the “hammer drill” mode. Set up a proper position before you drill, and let the machine do the work. Don’t try to force the tool, as this could damage it. 

Once you’ve positioned yourself correctly, commence drilling, and witness the rotary hammer drill’s power in action. If you wish to use the drill as a chipper, adjust the setting to “hammer” mode. 

Following these instructions, you can confidently utilize the Makita rotary hammer drill for your drilling and chipping needs.

5 Drill Features Everyone Should Know

Here are five drill features that everyone should know:

Drill Modes

Most modern drills offer multiple drill modes. The standard drill mode operates at full force, disregarding the clutch setting. Drive mode, represented by a screw icon, utilizes the clutch and limits torque based on the clutch setting. 

In hammer drills, Hammer mode uses a hammering action to provide extra strength when working on rigid materials like masonry.

Keyless Ratcheting Chuck

Keyless Ratcheting Chuck

Many cordless drills now come with a keyless chuck, allowing users to tighten or loosen it by hand. Some drills also have a ratcheting chuck, which makes an audible clicking sound to indicate that the chuck is securely in place.

How to Shift Gears

How to Shift Gears

Similar to a manual transmission vehicle, drills offer the option to shift gears. The gear selector usually has two or more speed options at the top of the drill. The first gear provides higher torque but lower speed, while the second gear offers higher speed and less torque. 

“It’s crucial to stop the drill completely before switching gears.”

How to Use the Clutch

How to Use the Clutch

The clutch allows users to select the torque applied before disengaging. Lower clutch settings prevent overdriving screws, while higher settings provide more torque. It’s beneficial when pre-drilling holes before driving screws.

Side Handle for Kickback Prevention

Side Handle for Kickback Prevention

Many full-size drills have a side handle to prevent kickback and improve drilling grip. Kickback occurs when the drill bit binds up in the material, causing the drill to kick over and potentially causing injury. 

The side handle, positioned at nine o’clock for right-handed users, provides better control and protection against kickbacks.

Understanding these five drill features enhances the user’s drilling experience and promotes safety. Always refer to the drill’s manual for specific instructions and additional features that may be present on your particular model.

What is the difference between a hammer drill and a rotary hammer drill?

What is the difference between a hammer drill and rotary hammer drill?

The difference between a hammer drill & a rotary hammer drill lies in their chuck types and functionality. A hammer drill typically has a standard three-jaw chuck that grips cylindrical shanks of drill bits. 

Conversely, a Makita rotary hammer drill usually features an SDS Plus or SDS Max chuck. The most common type is SDS Plus, which doesn’t have teeth but allows the drill bit to be easily inserted and used.

The main distinction between these drills is their impact mechanism. A hammer drill delivers a combination of rotational and forward hammering motion, enabling it to drill into concrete, masonry, and stone. However, it may not be as helpful or efficient as a rotary hammer drill when dealing with harsh surfaces.

With its SDS chuck, a Makita rotary hammer drill offers a more robust and specialized impact mechanism. It uses a piston-driven mechanism to generate high-impact blows while rotating, making it more suitable for heavy-duty drilling tasks on hard materials. 

The Makita rotary hammer drill is usually used in professional construction work. In addition, it can handle more significant drill bits for drilling bigger holes.

A hammer drill is suitable for occasional concrete drilling and general drilling tasks. In contrast, a Makita rotary hammer drill is designed for more demanding applications that involve regularly drilling into harsh surfaces like concrete.

What is the advantage of a rotary hammer?

The Makita rotary hammers offer advantages over hammer drills, making them the preferred tool for professionals and heavy-duty applications. One key advantage is their ability to deliver considerably more impact energy. 

The piston mechanism in a rotary hammer generates a more powerful and forceful blow, allowing for efficient drilling even in the most challenging materials. This increased impact energy enables faster and easier drilling through concrete, brick, and other hard surfaces, saving time and effort.

Moreover, Makita rotary hammers are designed to be more durable and robust. They are built to withstand demanding construction environments and prolonged heavy use. The construction of a Makita rotary hammer includes sturdier components and enhanced mechanisms to handle the higher forces and vibrations generated during drilling. 

This durability ensures that rotary hammers endure rigorous job site conditions and have a longer lifespan than hammer drills.

Another notable advantage of Makita rotary hammers is their versatility in offering multiple operating modes. Most Makita rotary hammers feature drill mode, hammer drill mode, and hammer-only mode. 

In drill mode, the tool functions similarly to a regular drill, rotating the bit without the hammering action. In hammer drill mode, the Makita rotary hammer combines rotation with a forward hammering action, allowing for efficient drilling in hard materials. 

The hammer-only mode, sometimes called chipping mode, deactivates rotation and focuses solely on the hammering action. This mode enables the Makita rotary hammer to function as a mini jackhammer, making it ideal for chiseling or breaking up concrete or masonry tasks.

The combination of increased impact energy, durability, and versatile operating modes makes Makita rotary hammers indispensable for heavy construction work, such as drilling anchor holes, installing concrete fasteners, or demolishing old structures. 

While they may be bulkier and heavier than hammer drills, their exceptional performance and functionality in challenging applications make them the tool of choice for professionals requiring precision, power, and reliability.

Makita rotary hammers are better than hammer drills for professionals and heavy-duty applications. Their impact energy is a major benefit. A Makita rotary hammer’s piston mechanism delivers a stronger blow, enabling efficient drilling even in tough materials. 

Increased impact energy makes drilling through concrete, brick, and other hard surfaces faster and easier.

How to use a Rotary Hammer For beginners – Guide By Daily Life Tools

Using a rotary hammer for beginners requires understanding its key features and functions. Let’s delve into the guide provided by Daily Life Tools

To begin using the rotary hammer, inserting the appropriate bit is crucial. In this case, an SDS bit is used, which is designed to fit into the rotary hammer. Secure the bit, and the collar is pulled down, inserted, and released, ensuring a clicking sound signifies a proper lock. 

Again, safety precautions are emphasized, including constantly unplugging the tool before working on it and wearing safety glasses.

The Makita rotary hammer proves useful for various applications. The tool’s power and efficiency are advantageous for drilling into thick foundation walls or basement floors. It prevents drilling into the dirt when drilling anchor holes. 

It ensures the avoidance of electrical wiring or other hidden elements in walls. The guide mentions the availability of chisel bits for concrete demolition work. Drilling holes before chiseling weakens the material, making the process more manageable.

The Makita rotary hammer Maintenance is crucial for longevity. Therefore, regular greasing of the tool’s fittings is recommended. Adding a little amount of grease to the end of the bit before insertion helps reduce friction caused by concrete or sawdust, enhancing the tool’s performance. Greasing is likened to greasing the fittings in a car.

The Makita rotary hammer offers different operating modes. The dial on the tool provides options such as drill mode, suitable for metal or wood drilling, and hammer drill mode, combining drilling and hammering for concrete applications. 

The hammer-only mode helps with chip or chiseling tasks, such as removing old bricks or masonry.

By following these Daily Life Tools guidelines, beginners can effectively and safely use a Makita rotary hammer for various construction and demolition projects.

How do you loosen a Makita chuck?

Hi, I’m here to guide you on changing a chuck on a percussion drill. Don’t worry; it’s not very difficult at all! If there is a screw in the middle of the chuck, this is the best way to do it. Remove the screw by unscrewing it in a counterclockwise direction. The screw will have a left-handed thread, so keep that in mind. 

However, if your drill has no screw in the center, there’s still a simple method to change the chuck. Clamp an Allen key into the front of the chuck, and then use a spanner on the back where there are two flats. With this setup, you can easily undo the chuck. 

If you have a vice, you can also secure the drill in the vice to provide stability while undoing the chuck. 

Once the chuck is incomplete, you can remove it from the shaft. To reinstall the chuck, screw it back onto the shaft and tighten it by pinching it up. You don’t need to tighten it excessively. 

Finally, if there was a screw in the chuck, don’t forget to put it back in. 

That’s all there is to it! Changing a chuck on a percussion drill is a simple process you can easily handle.

Rotary Hammer Makita Clutch And Percussion Problem

Suppose you’re experiencing clutch and percussion problems with your Makita rotary hammer. You can experiment with a few alternate possibilities and answers to that issue. Here are some troubleshooting steps to help address the issue:

Check the clutch settings

Ensure that the clutch is adjusted correctly. The clutch controls the torque and prevents the tool from rotating when excessive resistance is encountered. The clutch may slip or disengage if set too low during use. 

Adjust the clutch to a higher setting, following the manufacturer’s instructions if necessary.

Inspect the drill bit and chuck

Check the drill bit and chuck for any damage or wear. A damaged or worn drill bit can cause the percussion mechanism to malfunction. Replace the drill bit if necessary, and ensure it is securely tightened in the chuck.

Clean and lubricate the tool

Over time, dust, debris, and lack of lubrication can affect the performance of the Makita rotary hammer. Clean the tool thoroughly, paying attention to the clutch and percussion mechanism areas. 

You can use compressed air or a brush to remove any built-up debris. Apply a recommended lubricant to the necessary parts per the manufacturer’s instructions.

Check for damage

Check the clutch assembly and percussion mechanism of the Makita rotary hammer for wear. Any parts that appear worn or broken may need to be replaced. Contact Makita customer support or a qualified service center for assistance obtaining and replacing the damaged parts.

Professional servicing

If the problem persists after attempting the above steps, it may be necessary to take the rotary hammer to an authorized Makita service center for professional inspection and repair. They can diagnose and repair difficult clutch and percussion issues.

Always consult the user manual or contact Makita for specific instructions on troubleshooting or warranty-related inquiries.

Final Vert

In conclusion, when it comes to picking the most suitable Makita rotary hammer for your needs, it’s essential to consider factors such as motor orientation, modes of operation, engine power, impact force, drilling diameter, rotation speed and impact rate, chuck type, weight, and additional features. 

Considering these factors, you can select a rotary hammer that meets your requirements and tasks.

The Makita HR2475 1″ Rotary Hammer is the best overall choice among the top five Makita rotary hammers mentioned in this article. It offers a powerful motor, versatile three-mode operation, torque-limiting clutch, ergonomic design, and multiple chisel positioning, making it suitable for various applications.

The Makita XRH04Z 18V LXT Lithium-Ion Cordless 7/8″ Rotary Hammer is an excellent option for those seeking an upgrade. It provides powerful and efficient percussive drilling, three-mode operation, compact design, reduced vibration, and other convenient features.

If you need a versatile rotary hammer for all-purpose use, the Makita XNB02Z 18V LXT Straight Finish Nailer is worth considering. It delivers impressive performance, superior craftsmanship, stability, control, & durability, making it a reliable tool for woodworking projects.

Lastly, the Makita XRH01Z 18V LXT Lithium-Ion Brushless Cordless 1-Inch Rotary Hammer offers the revolutionary BL Brushless Motor Technology, ensuring robust and efficient drilling performance.

Conduct thorough research, read customer reviews, and consider your needs before purchasing. Investing in a quality Makita rotary hammer can significantly impact your drilling experience and overall productivity.


Can this be used to remove (Chizel) ceramic wall and floor tile from drywall and wood

Yes, it can, but it’s an expensive option for that kind of work. Harbor freight makes a cheaper impact hammer designed for that work and works/lasts well. I have both this and the HF option, and the HF one is better for just chiseling tiles.

How does this perform against solid concrete?

Awesome! You can switch between chipping and drilling, and It drills through concrete like warm butter.

How long was the ramp up time?

It’s fast. Faster than Dewalt.

Is this model good for chipping dirt? Or should i get the longer barrel model that cost about $100 less? If its noticeably more powerful I’ll take this

It’s short for doing that unless you are on your knee. It’s not designed for that. It’s great for drilling into masonry, brick, and concrete. I would use a small jackhammer-type tool. And probably corded if you’ve got a lot of dirt to “chip.”

Will this cord work on a Makita model 5077b hypoid saw?

Yes, it will fit. I have that a 5077B Hypoid saw and it fit perfect !
Share your love
Daily Life Tools You Need
Daily Life Tools You Need

Daily life tools that save you and your valuable time! We become what we behold. We shape our tools and then our tools shape us.

Articles: 78